It is very common for mold to grow without being noticed, especially in your basement. It is dangerous to have mold in your home because it not only makes your home ugly but also can cause respiratory diseases, which are a danger to lives. Waterproofing Toronto should remove removal of mold as well.
The basement is one of the favorite places for mold to grow. If the basement is leaking or there is a lot of moisture, mold will likely find a suitable breeding place. You should seek a professional technician if you realize there is any in your home. Here are steps on mold removal during the process of waterproofing Toronto that could help with the process.
1. Assessment
A well-experienced technician takes assessment as the first step before starting any real work. The contractor should inspect whether the mold is really there since the musty smell may be a result of something else sometimes.
During the assessment, the contractor will likely move things from their usual place to inspect how bad the mold has spread. The assessment also helps you get the confidence that the contractor knows what they are doing.
2. Containment
When the contractor determines that there is mold to be removed, the next step is to determine the right containment measure so that the mold spores do not spread to other parts of the house during basement waterproofing Toronto.
The process of removing mold may result in freeing spores into the air. If there are other people in the home during this process, they may inhale these spores and end up getting respiratory diseases.
Containment helps keep the spores in the basement during removal until the contractor gets to the step where they can filter to get rid of the spores. If the mold has spread to several rooms, the contractor should work with one room at a time.
3. Filtration
A well-qualified professional should be aware of how to use filtration machines to remove mold spores in the air. The kind of filters required for this job is mostly found in advanced vacuum cleaners.
During the filtration stage, the contractor should ad protect themselves well-using goggles and air filter masks to make sure they don’t get affected while working on your home.
4. Removal
The removal of mold is one of the most important steps during basement waterproofing Toronto. Regardless of how bad the mold has caused damage in your home, the contractor will know how to deal with it and leave your home mold free.
The contractor also identifies and repairs the cause of moisture that is causing mold growth to avoid the recurrence of the same problem in the future. Knowing the effects of mold, you should not leave it unremoved once you notice it has infested any part of your room.
5. What Homeowners should do for the removal of mold
The homeowner also has a role in the removal of mold in their homes. These are some of the things the homeowner can do.
1. Inspection
To keep the basement in good condition and free of moisture, you need to inspect it regularly for any signs that you may need to repair. Regularly check the basement for any signs of water leakage since water is a major cause of mold issues.
2. Check the gutters
Before you assume that you need to get a professional to waterproof the basement, you should ensure that is the required solution. Sometimes the basement may not leak, and the issue could originate from other parts. For instance, a clogged gutter could be keeping the water around the basement other than away from it.
3. Get a dehumidifier
It is important to ensure that you get rid of any excess moisture in your home. Moisture is the major cause of moisture growth, and other than basement waterproofing Toronto to repair leakage, you should also deal with the extra moisture inside.
4. Inspect your connections
If some pipes or openings lead to the basement, you should ensure that they are not allowing water to get in through them to the basement. The basement could not be leaking, but other connections could be the issue.